84
2. Instrument cluster
SEQUOIA_OM_USA_OM0C013U_19MY
*
1
: These lights turn on when the engine switch is turned to the “ON” position
to indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if the lights do not come on, or do not turn off. Have the vehicle
inspected by your Toyota dealer.
*
2
: This light illuminates on the multi-information display.
*
3
: The light flashes to indicate that the system is operating.
*
4
: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the engine switch is turned to the “ON” position, the BSM function
is enabled on the screen of the multi-information display.
• When the BSM function is enabled on the screen of the multi-infor-
mation display, the engine switch is turned to the “ON” position.
If the system is functioning correctly, the BSM outside rear view mirror
indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
*
5
: This light illuminates on the center panel.
*
6
: This light turns on when the system is off.
(if equipped)
High speed four-wheel
drive indicator (P. 2 95 )
*
1, 5
“AIR BAG ON/OFF” indi-
cators (P. 49)
(if equipped)
Low speed four-wheel
drive indicator (P. 2 95 )
(if equipped)
“TOW/HAUL” indicator
(P. 203)
(if equipped)
Center differential lock
indicator (P. 295)
*
2
Low outside tempera-
ture indicator (P. 86)
*
1
(if equipped)
“AUTO LSD” indicator
(P. 300, 303)
To Next Page
Loading...
