40
TOYOTA SAFETY SENSE
™
(1) Press “ ” or “ ” of meter control switches and select .
(2) Press “
” or “ ” of meter control switches and select “LDA”, and press .
(3) Press “
” or “ ” of meter control switches and select “Sway Warning
Sensitivity”, and press
to select the desired setting.
(1) Press “
” or “ ” of meter control switches and select .
(2) Press “
” or “ ” of meter control switches and select “LDA”, and press .
(3) Press “
” or “ ” of meter control switches and select “Sway Warning”, and
press
to select the desired setting.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LDA SWAY WARNING SYSTEM
SWAY WARNING SYSTEM
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
To Next Page
Loading...
