Toyota SIENNA HYBRID 2022 User Manual

2020© R.A.SH Tronics Ltd™ All rights reserved.
Reproduction by any means, electronic, graphics (GUI) or mechanical, including photocopying, recording or by any information storage and retrieval
system or translation in whole or part is NOT PERMITTED without written authorization from R.A.SH Tronics Ltd.
TOYOTA SIENNA
HYBRID 2022
SECONDARY CONTROLS
INSTALLATION GUIDE
Applicable to Sienna models & Limited, starting from 2021
LAST UPDATED October 3, 2022
01REV:

Toyota SIENNA HYBRID 2022 Specifications

General

Brand	Toyota
Model	SIENNA HYBRID 2022
Category	Automobile
Language	English

Summary

IMPORTANT RELEASE NOTES

RECOMMENDED INSTALLATION PROCEDURE

INSTALLING THE LCD MODULE & LIN JUNCTION BOX

Details the installation steps for the LCD module and LIN junction box.

DESCRIPTION OF MAIN COMPONENTS

DRIVEIN STA-035 TOUCH-DISPLAY

VEHICLE INTERFACE MODULE (RSM-50X TSHBD)

Explains the dual CAN-Bus module for vehicle communication and secondary functions.

HVAC MODULE (VAC-412X TSNA_HVAC)

ENGINE START/STOP MODULE (UIS-28X)

SHIFT BY WIRE MODULE

VEHICLE INTERFACE MODULE WIRING

SHIFT BY WIRE WIRING DIAGRAM

ENGINE START STOP

IGNITION START STOP MODULE

Describes the module for vehicles with smart key systems.

IGNITION START MODULE WIRING (SMART KEY SYSTEM)

ELECTRONIC PARKING BRAKE WIRING

MULTI-FUNCTION TURN SIGNALS, HORN, HIGHBEAM WIRING VAC-10X_A MODULE

MULTI-FUNCTION FRONT WIPERS WIRING VAC-10X_A MODULE

MULTI-FUNCTION REAR WIPERS WIRING VAC-10X_B MODULE

MULTI-FUNCTION HEADLIGHTS WIRING VAC-10X_B MODULE

HEATING VENTILATION AND AIRCONDITIONING MODULE

POWER MIRRORS MODULE

USING THE EGREES MODULE

EGRESS MODULE WIRING

VOICE SCAN WIRING