73
13T068
Lower anchorages for the child restraint
systems complying with the FMVSS225
specifications are installed in the rear
seat.
The anchorages are installed behind the
slits in the seat cushion of both outside
rear seats.
Child restraint system complying with the
FMVSS213 specification can be fixed to
these anchorages. In this case, it is not
necessary to fix the child restraint system
with a seat belt on the vehicle.
13T074
Most upright
position
CHILD RESTRAINT SYSTEM INSTALLA-
TION
1. Fold down the seatback and back to
the most upright position until it
locks into place.
Make sure the seatback is locked secure-
ly.
Type A
—Installation with child
restraint lower anchorages
To Next Page
Loading...
