Toyota YARIS 2020 - Page 118

118
YARIS_NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL_Europe_MK0019_en
4-1. Basic operation
Select to enlarge the image hor-
izontally and vertically to full
screen.
Select to enlarge the image by
the same ratio horizontally and
vertically.
*
*
: USB video only
 From the Miracast
®
control
screen
1 Display the Miracast
®
control
screen. (P. 1 3 3 )
2 Select “Wide”.
3 Follow the steps in “From the
audio settings screen” from step
5. (P. 11 7)
■ Colour, tone, contrast and
brightness adjustment
The colour, tone, contrast and
brightness of the screen can be
adjusted.
 From the audio settings screen
1 Press the “SETUP” button.
2 Select “Audio”.
3 Select “Common”.
4 Select “Display”.
5 Select the desired item to be
adjusted.
•“Colour”
“R”: Select to strengthen the red colour
of the screen.
“
G”: Select to strengthen the green
colour of the screen.
•“Tone”
“+”: Select to strengthen the tone of the
screen.
“
-”: Select to weaken the tone of the
screen.
•“Contrast”
“+”: Select to strengthen the contrast of
the screen.
“
-”: Select to weaken the contrast of the
screen.
• “Brightness”
“+”: Select to brighten the screen.
“
-”: Select to darken the screen.
● Depending on the audio source, some
functions may not be available.
 From the Miracast
®
control
screen
1 Display the Miracast
®
control
screen. (P.133)
2 Select “Display”.
3 Follow the steps in “From the
audio settings screen” from step
5. (P. 11 8)
1 Press this switch to operate the
speech command system.
 The speech command system
and its list of commands can be
operated. (P. 14 8)
B
C
Speech command system