TOZED M60 - Page 25

Wifi Status
Display
switch/SSID/Broadcast/security/current
Access&Channel Numble
Status:ON Open Wifi
Status:OFF Close Wifi
SSID Change SSID name
OPEN Activate Broadcast SSID
CLOSE Deactivate Broadcast SSID
Bandwidth
Select bandwidth.Default should be "20M
ONLY"
Channel
Select Wi-Fi channel.Default should be
"Auto"
WPS Connect Connect to WPS
PIN Connect
Input the PIN displayed on the device
which to be connected
Status:ON Activate DHCP pool
Status:OFF Deactivate DHCP pool
Local IP Change the IP of the unit
Subnet Mask Set subnet mask.Default 255.255.255.0
DHCP Start
Set DHCP starting IP address.Default
192.168.8.100
DHCP End
Set DHCP end IP address.Default
192.168.8.250
DHCP Lease Set DHCP lease time.Default 24
Preferred DNS Set DNS IP address.Default 192.168.8.1
Software Version Show software version
Voice Status Show voice status
Hardware Info Show hardware information
Model Version Show model version
Battery Info Show battery status
MAC Address Show MAC address
Running Time Show running time
Advanced Settings
WPS Settings
DHCP Switch
Route FunctionSystem Info
Advanced Settings
Wifi Setting
Wifi Switch
Broadcast
Main SSID
DHCP Settings