10. Follow the instructions in the TP-Link Deco app to finish setup of the mesh. You will be asked if you
would like to add another mesh unit during setup. Click “Add another Deco” and follow the steps
until all 3 units are connected. This app is very well designed and will walk you through the steps if
you read each screen.
NOTE: Citizens Connected does not use Modems. On the screen talking about
connecting your modem, select “I do not have a modem” to continue.
Screens inside the app:
Identify your deco: select M5/M1300 What you’ll need: select Next
To Next Page
Loading...
