TP-Link Deco P9 - Setting Up the Deco Mesh System (Continued); Modem Connection Steps; Assigning a Location to Deco; Internet Connection Setup

4
4. Connect Deco to your modem
Power o your modem. Connect your Deco to
the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
Note: Plug your Deco directly into the wall instead of a power
strip.
5. Select a location
Select a location for this Deco.
If its location is not listed, you can create a
new one by choosing Custom.
6. Set Up Internet Connection
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.