EasyManuals Logo

TP-Link HA100 Quick Start Guide

TP-Link HA100
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Q1. Why can’t I pair the Music Receiver?
A. The Music Receiver is ready to be paired only when its LED turns white. Check the LED.
If it is off, re-plug the power cable or try another power outlet.
If it is blue, check your other paired devices and end the connection.
Q2. What can I do if my music does not come out from my stereo?
A1. Make sure your smart device and the Music Receiver are successfully connected, within 20
meters (66 feet) of each other, and within a direct line of sight. The Music Receiver will be
disconnected if your device's Bluetooth signal is blocked, interfered, or out of range for
longer than 5 minutes.
A2. Make sure your stereo and the Music Receiver are correctly connected via one of the
provided audio cables, and both are powered on.
A3. Make sure the volume on your music player and stereo are at an audible level.
Quick Start GuideHA100
Bringing Bluetooth to your home stereo
Bluetooth
Music Receiver
FAQ
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
1588
©2016 TP-LINK 7106505793 REV2.0.0
1. On the currently paired device, end the connection by:
Disabling Bluetooth or disconnecting TP-LINK_Music, or
Placing its back against the NFC Tag or Music Receiver (only for NFC-enabled
Android devices)
2. On another device, pair to the Music Receiver, then play and enjoy music!
Bonus Tips
After pairing a second device, you can restore connection of the former device to
enjoy music from them in turns. Simply pause music on one device and play on the
other one.
Note that audio may delay when switching from an iOS device.
Need more information?
Visit our website: www.tp-link.com
Play Music on Another Smart Device

Other manuals for TP-Link HA100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link HA100 and is the answer not in the manual?

TP-Link HA100 Specifications

General IconGeneral
Product colorBlack
Bluetooth version4.1
Bluetooth profilesA2DP
Compatible productsNFC
Transmission distance20 m
Apple devices compatibilityNot supported
Power sourceUSB/Battery
Output current1 A
Output voltage5 V
Quantity1
Cables includedAudio (3.5mm), RCA
Quick start guideYes
Weight and Dimensions IconWeight and Dimensions
Depth60.5 mm
Width66.5 mm
Height18.5 mm
Package depth135 mm
Package width95 mm
Package height70 mm
Package weight240 g