TP-Link HS105 - Page 2

Smart Wi-Fi Plug Mini
Supported Load Types:
Coffee Maker 800 W
Desk Lamp; 235.2 W
LCD: 270 W
Heater ISOOW
Humidifier: 260 W
Iron: 1500W
Toaster: 850 W
Tower Fan: 50 W
:0. Press to turn the socket ON or OFF.
Press and hold for 5 seconds or until the LED
flashes amber and blue alternately to initiate
the app onboarding process (SoftAP).
Press and hold for 10 seconds or until the LED
flashes amber rapidly to factory reset the
Smart Plug Mini.
ED Flashing amber and blue; App onboarding
process (SoftAP) initiated.
Flashing blue rapidly: Connecting to the
network.
Solid blue: Connected to the network.
Flashing amber rapidly: Factory reset.
Solid amber: Initializing, rebooting, or no
network connection.
Off: The Smart Plug Mini is switched OFF.
Troubleshooting
1. What devices can I control with the Smart Plug Mini?
You can control lights, fans, humidifiers, portable heaters, and
any small appliances in accordance with the Smart Plug Mini's
specifications.
2. What should I do when I can't turn devices on or off using Kasa?
• Make sure the devices connected to the Smart Plug Mini are
switched to ON.
• Make sure the Remote Control feature in the app is enabled to
control your devices from outside of your home.
3. What should I do when the LED is lit a solid amber?
A solid amber light indicates no network connection. You can
troubleshoot the following:
• Check your network connectivity.
• Avoid placing the Smart Plug Mini near potential sources of
radio signal interference such as microwave ovens, cordless
phones, baby monitors, and motor-driven appliances.
• Repeat the app onboarding process.
• Factory reset the Smart Plug Mini and try to add it again.
4. How do I pair the Smart Plug Mini with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html or wlxWm the Kasa Help
section for pairing instructions.
© 2015 TP-Link. All rights reseived mtmmmmmm