128
Chapter 16
Manage Your Mesh Device
16. 1. Set System Time
System time is the time displayed while the mesh device is running. The system time
you configure here will be used for other time-based functions like Parental Controls
and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1. Visit http://tplinkwifi.net or http://192.168.88.1, and log in with the password you
set for the mesh device.
2. Go to Advanced > System Tools > Time Settings page.
3. Configure the system time using the following methods:
Get from PC: Click this button if you want to use the current time of your PC.
Get from the Internet: Click this button if you want to get time from the internet.
Make sure your mesh device can access the internet before you select this way to
get system time.
4. Click Save.
5. After setting the system time, you can set Daylight Saving Time according to your
needs. Enable Daylight Saving Time, and set the start and end time and then click
Save to make the settings effective.
To Next Page
Loading...
