147
• Use another web browser or computer to log in again.
• Reset the mesh device to factory default settings and try again. If login still fails, please
contact the technical support.
Note: You’ll need to reconfigure the mesh device to surf the internet once the mesh device is reset.
Q4. What should I do if I can’t access the internet even though the
configuration is finished?
1. Visit http://tplinkwifi.net or http://192.168.88.1, and log in with your TP-Link ID or
the password you set for the mesh device.
2. Go to Advanced> Network > Status to check internet status:
If IP Address is a valid one, please try the methods below and try again:
• Your computer might not recognize any DNS server addresses. Please manually
configure the DNS server.
1 ) Go to Advanced > Network > LAN Settings >DHCP Server.
2 ) Enter 8.8.8.8 as Primary DNS, click SAVE.
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
To Next Page
Loading...
