149
1 ) Visit http://tplinkwifi.net or http://192.168.88.1, and log in with your TP-Link ID
or the password you set for the mesh device.
2 ) Go to Internet or Advanced > Network > Internet and focus on the MAC Clone
section.
3 ) Choose an option as needed (enter the MAC address if Use Custom MAC
Address is selected), and click SAVE .
Tips:
• Some ISP will register the MAC address of your computer when you access the internet for the first time
through their Cable modem, if you add a mesh device into your network to share your internet connection, the
ISP will not accept it as the MAC address is changed, so we need to clone your computer’s MAC address to
the mesh device.
• The MAC addresses of a computer in wired connection and wireless connection are different.
• Modify the LAN IP address of the mesh device.
Note:
Most TP-Link mesh devices use 192.168.88.1as their default LAN IP address, which may conflict with the IP range
of your existing ADSL modem/router. If so, the mesh device is not able to communicate with your modem and you
can’t access the internet. To resolve this problem, we need to change the LAN IP address of the mesh device to
avoid such conflict, for example, 192.168.2.1.
1 ) Visit http://tplinkwifi.net or http://192.168.88.1, and log in with your TP-Link ID
or the password you set for the mesh device.
2 ) Go to Advanced > Network > LAN.
3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1
as an example.
4 ) Click Save.
• Restart the modem and the mesh device.
To Next Page
Loading...
