TP-Link HX220 1 pz - Add TP-Link ID to Manage the Mesh Device; Remove TP-Link ID(S) from Managing the Mesh Device

74
Chapter 8 TP-Link Cloud Service
to or from the same mesh device as Users. All accounts can monitor and manage the
mesh device locally or remotely, but user accounts cannot:
• Reset the mesh device to its factory default settings either on the web management
page or in the Aginet app.
• Add/remove other TP-Link IDs to/from the mesh device.
8. 3. 1. Add TP-Link ID to Manage the Mesh Device
1. Visit http://tplinkwifi.net or http://192.168.88.1, and log in with your TP-Link ID.
2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Click
, enter another TP-Link ID as needed and click Save.
Note: If you need another TP-Link ID, please register a new one via the Aginet app. Refer to Manage the Mesh Device
via the TP-Link Aginet App to install the app and register a new TP-Link ID.
4. The new TP-Link ID will be displayed in the Bound Accounts table as a User.
8. 3. 2. Remove TP-Link ID(s) from Managing the Mesh Device
1. Visit http://tplinkwifi.net or http://192.168.88.1, and log in with your TP-Link ID.
2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click Unbind.