47
user idle-timeout minutes
no user idle-timeout
Parameter
minute ——The timeout time, ranging from 5 to 30 in minites. By default, the
value is 10.
Command Mode
Global Configuration Mode
Example
Configure the timeout time of the switch as 15 minites:
TP-LINK(config)# user idle-timeout 15
show user account-list
Description
The show user account-list command is used to display the information of the
current users.
Syntax
show user account-list
Command Mode
Any Configuration Mode
Example
Display the information of the current users:
TP-LINK(config)# show user account-list
show user configuration
Description
The user configuration command is used to display the security configuration
information of the users, including access-control, max-number and the
idle-timeout, etc.
Syntax
show user configuration
To Next Page
Loading...
