TP-Link JetStream T1500G-10MPS - VLAN Configuration

Choose the menu Switching→Traffic Monitor→Traffic Summary to load the following page.
Figure 5-12 Traffic Summary
The following entries are displayed on this screen:

Auto Refresh
Auto Refresh
: Allows you to Enable/Disable refreshing the
Traffic Summary
automatically.
Refresh Rate:
Enter a value in seconds to specify the refresh interval.

Traffic Summary
UNIT:1/LAGS:
Click 1 to show the information of the physical ports. Click LAGS
to
show the information of the link aggregation groups
Select:
Select the desired port for clearing. It is multi-optional.
Port:
Displays the port number.
Packets Rx
:
Displays the number of packets received on the port. The error
packets are not counted in.
Packets Tx:
Displays the number of packets transmitted on the port.
Octets Rx
:
Displays the number of octets received on the port. The error
octets are counted in.
Octets Tx:
Displays the number of octets transmitted on the port.
Statistics
: Click the Statistics button to view the detailed traffi
c statistics of
the port.
5.3.2 Traffic Statistics
Traffic Statistics screen displays the detailed traffic information of each port, which facilitates
you to monitor the traffic and locate faults promptly.
53