ADD IP-range:
Start IP: Enter the start IP address of the IP-range to the selected profile.
End IP: Enter the end IP address of the IP-range to the selected profile.
IP-range Table:
Select: Select to delete the IP-range entry from the profile.
Index: Displays the Index of the IP-range entry.
Start IP: Displays the start IP address of the IP-range.
End IP: Displays the end IP address of the IP-range.
9.4.2 Profile Binding
On this page you can configure the multicast filter rules for port. Take the configuration on this
page and the configuration on IP-Range page together to function to implement multicast filter
function on the switch.
Choose the menu Multicast→Multicast Filter→Profile Binding to load the following page.
Figure 9-13 Port Filter
To Next Page
Loading...
