TP-Link JetStream T2700G-28TQ - Page 167

155
Choose the menu Routing→DHCP Server→DHCP Server to load the following page.
Figure10-11 DHCP Server
The following entries are displayed on this screen:

Global Config

Ping Time Config

Excluded IP Address
Configure the Excluded IP Address which cannot be assigned by the switch.

Excluded IP Address Table
Select: Select the entry to delete the Excluded IP Address pool.
ID: Displays the corresponding
ID of the Excluded IP Address
pool.
Start IP Address: Displays the start IP Address of the Excluded IP Address pool.
End IP Address: Displays the last IP Address of the Excluded IP Address pool.
DHCP Server: Enable/Disable the switch as a DHCP server.
Ping Packets: The number of packets to be sent.
Ping Timeout: The time it takes to determine the specific IP not exist.
Start IP Address: The first one of the IP addresses that should not be assigned.
End IP Address: The last one of the IP addresses that should not be assigned.