TP-Link JetStream T2700G-28TQ - Page 233

221
The following entries are displayed on this screen:

Global Statistics
Router Checksum
Errors:
Displays the total number of VRRP packets received with an
invalid VRRP checksum value.
Router Version
Errors:
Displays the total number of VRRP packets received with an
unknown or unsupported version number.
Router VRID Errors:
Displays the total number of VRRP packets received with an
invalid VRID for this virtual router.

Statistics
Displays specified virtual router statistics. It lists all the statistics for the specified VRRP and can
be reset for your convenience when doing statistics.
VRID: The VRID for the selected Virtual Router.
Interface: The interface ID for the selected Virtual Router.
Checksum Errors:
Displays the number of VRRP packets received with an invalid
VRRP checksum value.
Version Errors:
Displays the number of VRRP packets received with an
unknown or unsupported version number.
State Transitioned
to Master:
Displays the number of times th
at this virtual router's state has
transitioned to Master.
Advertisement
Received:
Displays the number of VRRP advertisements received by this
virtual router.
Advertisement
Sent:
Displays the number of VRRP advertisements sent by this
virtual router.
Advertisement
Interval Errors:
Displays the number of the received
VRRP advertisement
packets whose advertisement interval was different from
the
one configured for the local virtual router.
Authentication
Failure:
Displays the number of VRRP packets receiv
ed that did not
pass the authentication check.
IP TTL Errors:
Displays the number of VRRP packets received by the virtual
router with IP TTL (Time-To -Live) not equal to 255.
Zero Priority
Packets Received:
Displays the number of VRRP packets received by
the virtual
router with a priority of '0'.
Zero Priority
Packets Sent:
Displays the number of VRRP packets sent by the virtual
router with a priority of '0'.
Address List Errors:
Displays the number of packets received for which the
address list does not
match the locally configured list for the
virtual router.
Invalid
Authentication
Type:
Displays the number of packets received with an unknown
authentication type.
Authentication Type
Mismatch:
Displays the number of packets received with an
authenticat
ion type different to the locally configured
authentication method.