T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
330
port —— The port number.
vlan-id —— The interface VLAN ID.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all the PIM neighbors:
T3700G-28TQ(config)# show ip pim neighbor
show ip pim bsr-router
Description
The show ip pim bsr-router command is used to display the candidate BSR
and RP information.
Syntax
show ip pim bsr-router
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the BSR and RP settings:
T3700G-28TQ(config)# show ip pim bsr-router
show ip pim rp
Description
The show ip pim rp command is used to display the RP information of the
specified multicast group.
Syntax
show ip pim rp ip-addr [ mapping ]
Parameter
ip-addr —— Specify the multicast group address of the desired RP.
mapping —— Display the active RPs that are cached with associated multicast
routing entries.
To Next Page
Loading...
