TP-Link JetStream T3700G-52TQ - Match Secondary-Cos; Match Destination-Address Mac

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)#class-map match-all Market ipv4
T3700G-52TQ(config-cmap)#match cos 3
25.15 match secondary-cos
Description
The match secondary-cos command definites a match condition based on
the secondary Class of Service(Cos) value (the secondary 802.1Q tag of a
double VLAN tagged packet). The match condition only apply to an IPv4
class.
Syntax
match secondary-cos cos-value
Parameter
cos-value —— The secondary Class of Service(Cos) value in an Ethernet
frame header, ranging from 0 to 7.
Command Mode
Class-Map Configuration Mode( IPv4)
Example
Create an IPv4 class whose name is “Market”, definites a match condition that
the secondary Class of Service(Cos) value should be 3:
T3700G-52TQ(config)#class-map match-all Market ipv4
T3700G-52TQ(config-cmap)#match secondary-cos 3
25.16 match destination-address mac
Description
The match destination-address mac command definites a match condition
based on the destination MAC address of a packet.
Syntax
match destination-address mac mac-address mac-mask
Parameter
mac-address —— The destination MAC address.
mac-mask —— The mask of the destination MAC address.
191