JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Mode Accessing Path Prompt
Logout or Access the
VLAN
Configuration
Mode
Use the vlan
vlan-list
command to enter this mode
from Global Configuration
mode.
T3700G-52TQ(config- vlan)#
Use the end command or
press Ctrl+Z to return to
Privileged EXEC mode.
Enter the exit or the #
command to return to
Global configuration
Router
Configuration
Mode
Use the router ospf
-id
to enter OSPF
Router mode from Global
Configuration mode.
Use the router rip command
to enter RIP Router mode from
Global Configuration mode.
T3700G-52TQ(config- router)
Use the end command or
press Ctrl+Z to return to
Privileged EXEC mode.
Enter the exit or the #
command to return to
Global Configuration
Interface
Configuration
Mode
Layer 2 Interface:
Use the interface
gigabitEthernet
port
or
interface range
gigabitEthernet
port-list
command to enter this mode
from Global Configuration
mode.
T3700G-52TQ(config-if)#
T3700G-52TQ(config-if-
range)#
Use the end command or
press Ctrl+Z to return to
Privileged EXEC mode.
Enter the exit or the #
command to return to
Global Configuration
mode.
A port number must be
specified in the interface
Layer 3 Interface:
Use the no switchport
command to enter Routed
Port mode from Interface
Configuration mode.
Use the interface vlan
vlan-id
command to enter VLAN
Interface mode from Global
Configuration mode.
Use the interface loopback
command to enter Loopback
Interface mode from Global
T3700G-52TQ(config-if)#
T3700G-52TQ(config-if-range)
#
Use the end command or
press Ctrl+Z to return to
Privileged EXEC mode.
Enter the exit or the #
command to return to
Global Configuration
mode.
DHCP
Configuration
Mode
Use the ip dhcp server pool
-name
command to enter
DHCP Configuration Mode
from Global Configuration
mode.
T3700G-52TQ(config-dhcp)
Use the end command or
press Ctrl+Z to return to
Privileged EXEC mode.
Enter the exit or the #
command to return to
Global Configuration
12
To Next Page
Loading...
