TP-Link JetStream TL-SL3428 - Show Interface Status; Show Interface Counters

TL-SL3428 JetStream L2 Managed Switch CLI Guide
116
configuration information of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the configurations of port5:
TP-LINK# show interface configuration ethernet 5
show interface status
Description
The show interface status command is used to display the connective-status
of an Ethernet port.
Syntax
show interface status {ethernet [interface]}
Parameter
Interface —— The port selected to display the connective-status. By default,
the connective-status of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the connective-status of all Ethernet ports:
TP-LINK(config)# show interface status ethernet
show interface counters
Description
The show interface counters command is used to display the statistic
information of an Ethernet port.
Syntax
show interface counters {ethernet [interface]}
Parameter
Interface ——The port selected to display the statistic information. By default,
the statistic information of all ports is displayed.
Command Mode