Smart Thermostatic Radiator Valve
Quick Start Guide
Install Guide:
Scan QR code or visit
https://www.tp-link.com/support/faq/3404/
1. Set up a Kasa smart hub in the Kasa Smart app if you
haven’t already done so. You can get the Kasa Smart app
from the App Store or Google Play.
If you want to remotely control / manage the valve, you need to add a Kasa smart hub rst. You can adjust temperature manually.
After inserting the batteries, the valve is ready to use.
Rotate the valve to increase / decrease temperature.
OR
2. Use the provided cover-opener to press and hold the
SYNC/RESET button for 5 seconds to reset the valve.
3. Open the Kasa Smart app, tap + and select Smart
Thermostats. Follow the app instructions to pair the valve
and complete setup.
There are two types of valves: Thermostatic and Manual.
Kasa Smart Thermostatic Radiator Valve is only compatible
with the thermostatic valve.
Thermostatic Valve Manual Valve
1. Check existing valve type
01 / Before Install
02 / Install the Valve
03 / Set Up the Valve After Install Don’t Have a Hub?
1. Unscrew the existing valve.
2. Check your connector type.
The ▲ at the bottom of the
valve indicates the position of the display.
For M30 x 1.5 connector: Screw the new valve directly.
2. Check install requirements
1. Install the valve rst before powering it up.
2. No need to shut o water before changing the radiator
valve. Water will not leak.
3. Avoid installing the valve in the same room where you
have installed the boiler thermostat.
4. Install the valve within range of your Kasa smart hub if
you wish to control it using the Kasa Smart app.
5. Install the valve
horizontally or vertically based on your
needs
.
Install Orientation
4. Open the battery cover and insert two AA LR6 Alkaline
batteries. Make sure the positive and negative
terminals face the correct direction.
3. Remove the cover of the valve by rotating
counterclockwise using the provided cover-opener.
*Do NOT use rechargeable batteries or 1.2V AA batteries.
Vertical InstallationHorizontal Installation
SYNC/RESET
*Images may dier from your actual product.
For non-M30 x 1.5 connector: Check whether one of the provided adapters ts the connector. If not, please purchase a proper
one yourself.
M30 x 1.5
30mm
1.5mm
RAVL Adapter CAL AdapterRA Adapter
GIA Adapter M28 AdapterRAV Adapter
To Next Page
Need help?
General
