TP-Link RE350K Quick Start Guide

Technical Support
?
If you encounter any problem during configuration, go to www.tp-link.com for web support and other troubleshooting information.
Wireless Adapter
LEDs and Buttons
RE350K Quick Start Guide
Hello. Meet your new
Range Extender.
Follow this guide to extend your Wi-Fi network.
Power LED
Blinking: Initializing or updating rmware.
2GHz and 5GHz LEDs
Blinking: The App-Cong process is initiated.
Green: The extender is connected to the main network.
Amber: The extender is connected but too far away from the router.
Off: No connection.
LED Button: Press to turn the status LEDs on or off.
Power I/O Switch: Slide this switch to turn the extender on or off.
Ethernet Port: To be used as a wireless adapter to connect
Ethernet-enabled device to the wireles network.
Reset Button: Press for 2 seconds until all LEDs blink once to reset
the extender to factory defaults.
App-Cong: Press for 2 seconds until both 2.4GHz and 5GHz LEDs
blink green to initiate the App-Cong process.
The range extender can also be used as a wireless adapter to connect any
Ethernet-only device, such as a Blu-ray® player, game console, DVR, or Smart TV,
to your Wi-Fi network.
Simply set up the extender using Option 1 or Option 2, and then connect your
Ethernet-only device to the extender using an Ethernet cable.
Option 1 Setup Using the Mobile App
1 TP-LINK Kasa App
Search for and download the TP-LINK Kasa mobile app in
the App Store or Google play, or simply scan the QR code.
OR
2 Connect to your Wi-Fi Network
Go to your mobile device’s Settings and connect to your
home Wi-Fi network that you wish to extend.
3 Extend your Wi-Fi Network
Launch Kasa and follow the app instructions to extend your Wi-Fi
network.
4 Connect to Extended Networks
Unless you customized the extended network names during the
configuration, the extender adds _EXT to the end of the main network’s
SSIDs and uses the same Wi-Fi password.
iOS Android
Known networks will be joined automatically. If no known
networks are available, you will be asked before joining a
new network.
Label
MyHome_5G
Network A
Network
Other...
CHOOSE A NETWORK…
Wi-Fi
MyHome
Wi-Fi
Settings
Carrier 22%4 21 PM
:
MyHome
MyHome_5G
MyHome_EXT
MyHome_5G_EXT
NETWORK DETAILS
My Range Extender
WIRELESS CLIENTS
9:41 PM 100%
GHz
2.4
GHz
5
MyHome_EXT
MyHome_5G_EXT
3
Total Clients
Sketch 9:41 AM 100%
Plug in your Range Extender
NEXT
Weak
Wi-Fi Area
Plug in your Range Extender midway
between your router and the area
with weak Wi-Fi.
Sketch 9:41 AM 100%
Start Configuration Mode
Press the button and wait
until the 2 bottom lights on the other
side are blinking green.
APP CONFIG
NEXT
APP
CONFIG
7106505854 REV 1.0.0
© 2015 TP-LINK. All rights reserved.

TP-Link RE350K Specifications

General

Brand	TP-Link
Model	RE350K
Category	Repeater
Language	English