SafeStream
TM
Gigabit Broadband VPN Router User GuideTL-R600VPN
15
4.2 Quick Setup
Please refer to chapter 3"Quick Installation Guide".
4.3 Network
Choose menu “Network”, the next submenus are shown below.
Figure 4-2
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.3.1 WAN
Choose menu “Network→WAN”, you can configure the IP parameters of the WAN on the screen
below.
The Router provides six connection types for WAN to connect to the Internet, they are “Dynamic
IP”, “Static IP”, “PPPoE/Russia PPPoE”, ”BigPondCable” , “L2TP/Russia L2TP” and
“PPTP/Russia PPTP”. For configuring the WAN, you should select the connection type firstly
according to your needs.
1. Dynamic IP
If you aren’t given any login parameters and IP information, please select Dynamic IP (shown in
Figure 4-3), then the router will automatically get IP parameters from your ISP. Click the Renew
button to renew the IP parameters from your ISP. Click the Release button to release the IP
parameters.
To Next Page
Loading...
