TP-Link SafeStream TL-R600VPN - Rule

SafeStream
TM
Gigabit Broadband VPN Router User GuideTL-R600VPN
38
4.7.1 Rule
Choose menu “Access Control →Rule”, you can configure the Internet Access Control to
manage Internet activities from LAN hosts in the next screen (shown in Figure 4-29).
Figure 4-29
¾ Enable Internet Access Control: Enable or disable the Internet Access Control.
¾ Default Filter Policy: Select a policy to allow or deny the packets matching the rules to pass
through the Router.
¾ Rule Name: Display the name of the rule and this name is unique.
¾ Host: Displays the hosts to which the rule takes effect.
¾ Target: Displays the corresponding target of the rule.
¾ Schedule: Displays the effective time of the rule.
¾ Action: Display the actions of the router to deal with the packets.
¾ Status: Displays the rule is enabled or disabled.
To add/modify an Internet Access Control entry:
Step 1: Click Add New…/Edit shown in Figure 4-29, you will see a new screen shown in Figure
4-30.
Step 2: Enter the Rule Name and select the Host, Target, Schedule, Action and Status.