TP-Link SafeStream TL-R600VPN - Page 61

SafeStream
TM
Gigabit Broadband VPN Router User GuideTL-R600VPN
55
¾ MAC Address - This field displays the MAC address of the controlled computer in the LAN.
¾ IP Address - This field displays the assigned IP address of the controlled computer in the
LAN.
¾ Bind - Select whether enable the ARP binding or not. Only bind the MAC address and IP
address can the function take effect.
To add/modify an IP & MAC binding entry:
Step 1: Click Add New…/Edit shown in Figure 4-55, you will see a new screen shown in Figure
4-56.
Step 2: Enter the MAC Address and IP Address in the corresponding field.
Figure 4-56
Step 3: Select Bind the MAC and IP address, and then click Save button to save the
configuration.
To find a specific IP & MAC binding entry:
Step 1: Click Find shown in Figure 4-55, you will see a new screen shown in Figure 4-57.
Step 2: Enter the specific MAC Address or IP Address in the corresponding field.
Figure 4-57
Step 3: Click Find button, then you will see the entry with the specific MAC address or IP
address.