Configuration Guide 390
Configuring LLDP Configuration Example
Switch_A#show lldp interface fastEthernet 1/0/1
LLDP interface config:
fastEthernet 1/0/1:
Admin Status: TxRx
SNMP Trap: Enabled
TLV Status
--- ------
Port-Description Yes
System-Capability Yes
System-Description Yes
System-Name Yes
Management-Address Yes
Port-VLAN-ID Yes
Protocol-VLAN-ID Yes
VLAN-Name Yes
Link-Aggregation Yes
MAC-Physic Yes
Max-Frame-Size Yes
Power Yes
LLDP-MED Status: Disabled
TLV Status
--- ------
Network Policy Yes
Location Identification Yes
Extended Power Via MDI Yes
Inventory Management Yes
View the Local Info
Switch_A#show lldp local-information interface fastEthernet 1/0/1
LLDP local Information:
fastEthernet 1/0/1:
To Next Page
Loading...
