TP-Link T1600-28TS - Access-List Bind(Interface)

194
Command Mode
Interface VLAN Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Bind ACL 100 to VLAN 2:
T1600G-52TS(config)# interface vlan 2
T1600G-52TS(config-if)# access-list bind acl 100
24.11 access-list bind(interface)
Description
The access-list bind command is used to bind a policy to a specified port. To
cancel the bind relation, please use no access-list bind command.
Syntax
access-list bind policy-name
no access-list bind
policy-name
Parameter
policy-name —— The name of the policy desired to bind.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Bind policy1 to port 1/0/2:
T1600G-52TS(config)# interface gigabitEthernet 1/0/2
T1600G-52TS(config-if)# access-list bind policy1