TP-Link T1600-28TS - Name

214
please use no instance command. When an instance is disabled, the related
mapping VLANs will be removed.
Syntax
instance instance-id vlan vlan-id
no instance instance-id [ vlan vlan-id ]
Parameters
instance-id —— Instance ID, ranging from 1 to 8.
vlan-id —— The VLAN ID selected to mapping with the corresponding
instance.
Command Mode
MST Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Map the VLANs 1-100 to Instance 1:
T1600G-52TS(config)# spanning-tree mst configuration
T1600G-52TS(config-mst)# instance 1 vlan 1-100
Disable Instance 1, namely remove all the mapping VLANs 1-100:
T1600G-52TS(config)# spanning-tree mst configuration
T1600G-52TS(config-mst)# no instance 1
Remove VLANs 1-50 in mapping VLANs 1-100 for Instance 1:
T1600G-52TS(config)# spanning-tree mst configuration
T1600G-52TS(config-mst)# no instance 1 vlan 1-50
26.8 name
Description
The name command is used to configure the region name of MST instance.
Syntax
name name