133
Clear Binding: Click the ClearBinding
button to clear all profiles bound to the
port.
Configuration Procedure:
Step Operation Description
1 Create Profile
Required. Configure the Profile ID and mode on
Multicast→IGMP Snooping→Profile Config page.
2 Configure IP-Range Required. Click Edit
of the specified entry in the IGMP Profile
Info table on Multicast→IGMP Snooping→
page to configure the mode or IP-range of the Profile.
3 Configure Profile Binding
for ports
Optional. Configure Profile Binding for ports on
Multicast→IGPM Snooping→Porfile Binding page.
9.1.8 Packet Statistics
On this page you can view the multicast data traffic on each port of the switch, which facilitates you
to monitor the IGMP messages in the network.
Choose the menu Multicast→IGMP Snooping→Packet Statistics to load the following page.
Figure 9-12 Packet Statistics
To Next Page
Loading...
