TP-Link T1700G-28TQ - 10.2 Routing Table Overview

145
Choose the menu Multicast→MLD Snooping→Profile Binding to load the following page.
Figure 9-19 Profile Config
The following entries are displayed on this screen:

Profile and Max Group Binding
UNIT/LAGS: Click unit number to configure the physical ports of this
unit member. Click LAGS
to configure the link
aggregation groups.
Select:
Select the desired port for multicast filtering. It is
multi-optional.
Port: The port to be bound.
Profile ID: The existing Profile ID bound to the selected port.
Max Group:
The maximum multicast group a port can join, range
from 0 to 1000.
Overflow Action:
The policy should be taken when the number of
multicast group a port has joined reach the maximum.
 Drop: Drop the successive report packet, an
d this
port cannot join any other multicast group.
 Replace: When the number of the dynamic multicast
groups that a port joins has exceeded the max-group,
the newly joined multicast group will replace an
existing multicast group with the lowest multicast
group address.