TP-Link T1700G-28TQ - Action Create; ACL Binding

182
Figure 12-10 Create Policy
The following entries are displayed on this screen:

Create Policy
Policy Name: Enter the name of the policy.
12.3.3 Action Create
On this page you can add ACLs for the policy.
Choose the menu ACL→Policy Config→Action Create to load the following page.
Figure 12-11 Action Create
The following entries are displayed on this screen:

Create Action
Select Policy: Select the name of the policy.
Select ACL: Select the ACL for configuration in the policy.
12.4 ACL Binding
ACL Binding function can have the ACL take its effect on a specific port/VLAN. The ACL will take
effect only when it is bound to a port/VLAN. In the same way, the port/VLAN will receive the data
packets and process them based on the ACL only when the ACL is bound to the port/VLAN.
The ACL Binding can be implemented on Binding Table, Port Binding and VLAN Binding
pages.