23
You can configure the system’s administrative IPv6 address on this page.
Choose the menu System →System Info →System IPv6 to load the following page.
Figure 4-9 System IPv6
The following entries are displayed on this screen:
Global Config
IPv6:
Interface ID:
Enable/Disable IPv6 function globally on the switch.
Choose the interface type and input the interface ID.
types include VLAN, routed port and port channel.
Link-local Address Config
Config Mode: Select the link-local address configuration mode.
Manual:
When this option is selected, you should assign a
link-local address manually.
Auto:
When this option is selected, the switch will generate a
link-local address automatically.
To Next Page
Loading...
