TP-Link T1700G-28TQ - Page 69

59
Choose the menu Switching→Port→Port Security to load the following page.
Figure 6-4 Port Security
The following entries are displayed on this screen:

Port Security
UNI
T: Click unit number to configure the physical ports
of this unit
member.
Select
: Select the desired port for Port Security configuration. It is
multi-optional.
Port
: Displays the port number.
Max Learned MAC
: Specify the maximum number of MAC addresses that can be
learned on the port.
Learned Num
: Displays the number of MAC addresses that have been learned
on the port.
Learn Mode
: Select the Learn Mode for the port.
 Dynamic: When Dynamic mode is selected, the learned
MAC address will be deleted automatically after the aging
time.
 Static: When Static mode is selected, the learned MAC
address will be out of the influence of the aging time and
can only be deleted manually. The learned entries will be
cleared after the switch is rebooted.
 Permanent: When P
ermanent mode is selected, the
learned MAC address will be out of the influence of the