TP-Link T1700G-28TQ - 7.1 802.1 Q VLAN Configuration

69

Auto Refresh
Auto Refresh
:
Allows you to Enable/Disable refreshing the Traffic Summary
automatically.
Refresh Rate
: Enter a value in seconds to specify the refresh interval.

Traffic Summary
UNIT
/LAGS: Click unit numbe
r to display the information of the physical ports
associated with this unit member. Click LAGS
to display the
information of the link aggregation groups.
Select
: Select the desired port for clearing. It is multi-optional.
Port
: Displays the port number.
Packets Rx
:
Displays the number of packets received on the port. The error
packets are not counted in.
Packets Tx
: Displays the number of packets transmitted on the port.
Octets Rx
: Displays the number of octets received on the port. The error octet
s
are counted in.
Octets Tx
: Displays the number of octets transmitted on the port.
Statistics
: Click the Statistics
button to view the detailed traffic statistics of the
port.
6.3.2 Traffic Statistics
Traffic Statistics screen displays the detailed traffic information of each port, which facilitates you to
monitor the traffic and locate faults promptly.