TP-Link T1700G-28TQ - 7.6 Protocol VLAN Application Example

82
Choose the menu VLAN→802.1Q VLAN→Port Config to load the following page.
Figure 7-5 Port Config
The following entries are displayed on this screen:

VLAN Port Config
UNIT/LAGS: Click unit number to configure the physical ports
of this unit
member. Click LAGS to configure the link aggregation groups.
Select:
Select the desired port for configuration. It is multi-optional.
Port:
Displays the port number.
PVID: Enter the PVID number of the port.
LAG: Displays the LAG to which the port belongs.
VLAN: Click the Detail button to view the information of the V
LAN to
which the port belongs.
Click the Detail button to view the information of the corresponding VLAN.
Figure 7-6 View the Current VLAN of Port