TP-Link T1700G-28TQ - Application Example for 802.1 Q VLAN

83
The following entries are displayed on this screen:

VLAN of Port
VLAN ID
：
Displays the ID number of VLAN.
Name:
Displays the user-defined description of VLAN.
Operation: Allows you to remove the port from the current VLAN.
Configuration Procedure:
Step Operation Description
1
Configure the PVID. Optional. On the VLAN→802.1Q VLAN→Port Config page,
configure the PVID of the port basing on its connected device.
2
Create VLAN. Required. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Create button to create a VLAN. Enter the VLAN ID and
the name for the VLAN. Meanwhile, specify its member ports and
the link type of the ports.
3
Modify/View VLAN. Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Edit/Detail
button to modify/view the information of the
corresponding VLAN.
4
Delete VLAN Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
select the desired entry to delete the corresponding VLAN by
clicking the Delete button.
7.2 Application Example for 802.1Q VLAN
 Network Requirements
 Switch A is connecting to PC A and Server B;
 Switch B is connecting to PC B and Server A;
 PC A and Server A is in the same VLAN;
 PC B and Server B is in the same VLAN;
 PCs in the two VLANs cannot communicate with each other.