TP-Link T2500G-10TS - Clear Logging; Show Logging Local-Config

T2500G-10TS(config)# logging host index 2 192.168.0.148 5
18.6 clear logging
Description
The clear logging command is used to clear the information in the log buffer
and log file.
Syntax
clear logging [ buffer | flash ]
Parameter
buffer | flash —The output channels: buffer and flash. Clear the information of
the two channels, by default.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Clear the information in the log file:
T2500G-10TS(config)# clear logging buffer
18.7 show logging local-config
Description
The show logging local-config command is used to display the configuration
of the Local Log output to the console, the terminal, the log buffer and the log
file.
Syntax
show logging local-config
Command Mode
Privileged EXEC Mode and Any Configuration Mode
136