TP-Link T2500G-10TS - Show Ipv6 Mld Snooping Statistics

Syntax
show ipv6 mld snooping querier [vlan vlan-id ]
Parameter
vlan-id ——The VLAN ID selected to display, ranging from 1 to 4094.
Privilege Requirement
None.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display all Querier information:
T2500G-10TS(config)# show ipv6 mld snooping querier
32.34 show ipv6 mld snooping statistics
Description
The show ipv6 mld snooping statistics command is used to display the
statistics of the MLD packets.
Syntax
show ipv6 mld snooping statistics [interface gigabitEthernet port ]
Parameter
port —— Specify the port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display statistics of MLD packets:
T2500G-10TS(config)# show ipv6 mld snooping statistics
287