TP-Link T2500G-10TS - 9.2 MLD Snooping

131
Note:
1. Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3.
2. When both Fast Leave feature and Unknown Multicast Discard feature are enabled, the
leaving of a user connected to a port owning multi-user will result in the other users
intermitting the multicast business.
3. Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled.
4. Multicast Filter feature has no effect on static multicast IP.
5. Up to 15 IP-Ranges can be bound to one port.
9.1.4 IP-Range
On this page you can figure the desired IP-ranges to be filtered.
Choose the menu Multicast→IGMP Snooping→IP-Range to load the following page.
Figure 9-8 Multicast Filter
The following entries are displayed on this screen:

Create IP-Range
IP Range ID:
Enter the IP-range ID.
Start Multicast IP:
Enter start multicast IP of the IP-range you set.
End Multicast IP:
Enter end multicast IP of the IP-range you set.

IP-Range Table
IP-Range ID Select: Click the Select button to quick-
select the corresponding
IP-range ID based on the ID number you entered.
Select:
Select the desired entry to delete or modify the corresponding
IP-range. It is multi-optional.
IP-Range ID:
Displays IP-range ID.