TP-Link T2500G-10TS - Chapter 2 Introduction; Overview of the Switch; Appearance Description; Front Panel

7
Chapter 2 Introduction
2.1 Overview of the Switch
Designed for workgroups and departments, T2500G-10TS from TP-LINK provides wire-speed
performance and full set of layer 2 management features. It provides a variety of service
features and multiple powerful functions with high security.
The EIA-standardized framework and smart configuration capacity can provide flexible solutions
for a variable scale of networks. ACL, 802.1x, IP Source Guard and Dynamic ARP Inspection
provide robust security strategy. QoS and IGMP snooping/filtering optimize voice and video
application. Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport
of business critical data. SNMP, RMON, WEB/Telnet/SSH Log-in bring abundant management
policies. T2500G-10TS switch integrates multiple functions with excellent performance, and is
friendly to manage, which can fully meet the need of the users demanding higher networking
performance.
2.2 Appearance Description
2.2.1 Front Panel
Figure 2-1 Front Panel
The following parts are located on the front panel of the switch:
Name
Status
Indication
PWR
On
Power is on.
Flashing
Power supply is abnormal.
Off
Power is off or power supply is abnormal.
SYS
On
The switch is working abnormally.
Flashing
The switch is working normally.
Off
The switch is working abnormally.
10/100/1000M
On
Green
A 1000Mbps device is connected to the
corresponding port, but no activity.
Yellow
A 10/100Mbps device is connected to the
corresponding port, but no activity.
Flashing
Data is being transmitted or received.
Off
Not linked.