TP-Link T2500G-10TS - Holiday Config

172
End Time:
Set the end time of the time-slice.

Time-Slice Table
Index:
Displays the index of the time-slice.
Start Time:
Displays the start time of the time-slice.
End Time:
Displays the end time of the time-slice.
Delete:
Click the Delete button to delete the corresponding time-slice.
11.1.3 Holiday Config
Holiday mode is applied as a different secured access control policy from the week mode. On
this page you can define holidays according to your work arrangement.
Choose the menu ACL→Time-Range→Holiday Config to load the following page.
Figure 11-3 Holiday Configuration
The following entries are displayed on this screen:

Create Holiday
Start Date:
Specify the start date of the holiday.
End Date:
Specify the end date of the holiday.
Holiday Name:
Enter the name of the holiday.

Holiday Table
Select:
Select the desired entry to delete the corresponding holiday.
Index:
Displays the index of the holiday.
Holiday Name:
Displays the name of the holiday.
Start Date:
Displays the start date of the holiday.
End Date:
Displays the end date of the holiday.