TP-Link T2500G-10TS - Action Create

179
11.3.3 Action Create
On this page you can add ACLs and create corresponding actions for the policy.
Choose the menu ACL→Policy Config→Action Create to load the following page.
Figure 11-11 Action Create
The following entries are displayed on this screen:

Create Action
Select Policy:
Select the name of the policy.
Select ACL:
Select the ACL for configuration in the policy.
S-Mirror: Select S-
Mirror to mirror the data packets in the policy to the
specific port.
S-Condition: Select S-
Condition to limit the transmission rate of the data packets
in the policy.
 Rate:
Specify the forwarding rate of the data packets those
match the corresponding ACL.
 Out of Band:
Specify the disposal way of the data packets those
are transmitted beyond the rate.
Redirect:
Select Redirect to change the forwarding direction of the data
packets in the policy.
 Destination Port: Forward the data packets
those match the
corresponding ACL to the specific port.