TP-Link T2500G-10TS - Manual Binding

187
Collision:
Displays the Collision status of the entry.
• Warning:
Indicates that the collision may be caused by
the MSTP function.
• Critical:
Indicates that the entry has a collision with the
other entries.
Note:
1. Among the entries with Critical collision level, the one with the highest Source priority will
take effect.
2. Among the conflicting entries with the same Source priority, only the last added or edited
one will take effect.
12.1.2 Manual Binding
You can manually bind the IP address, MAC address, VLAN ID and the Port number together in
the condition that you have got the related information of the Hosts in the LAN.
Choose the menu Network Security→IP-MAC Binding→Manual Binding to load the following
page.
Figure 12-2 Manual Binding
The following entries are displayed on this screen:

Manual Binding Option
Host Name:
Enter the Host Name.
IP Address:
Enter the IP Address of the Host.
MAC Address:
Enter the MAC Address of the Host.
VLAN ID:
Enter the VLAN ID.
Port:
Select the number of port connected to the Host.
Protect Type:
Select the Protect Type for the entry.