TP-Link T2500G-10TS - Authentication Server Config

219
Choose the menu Network Security→AAA→Global Config to load the following page.
Figure 12-8 Application Authentication Settings

Configuration Procedure:
1) Select the application module.
2) Configure the authentication method list from the Login List drop-down menu. This option
defines the authentication method for users accessing the switch.
3) Configure the authentication method list from the Enable List drop-down menu. Thisoption
defines the authentication method for users requiring the administrator privilege.

Entry Description:
Module:
Lists of the configurable applications on the switch.
Login List:
Configure an application for the login utilizing a previously
configured method list.
Enab
le List: Configure an application to promote the user level to admin-level
users utilizing a previously configured method list.
12.5.8 802.1X Authentication Server Config
This page is used to configure the RADIUS server group used in 802.1X Authentication and
Accounting.