TP-Link T2500G-10TS - Default Settings

220
Choose the menu Network Security→AAA→Dot1x List to load the following page.

Configuration Procedure:
1) Configure the 802.1X function both globally and on the supplicant-connected port. Please
refer to 13.6 802.1X for more details.
2) Go to Network Security→AAA→Global Conifg to enable AAA function.
3) Configure the 802.1X Aunthentication RADIUS server group in the Authentication Dot1x
Method List Table.
4) Configure the 802.1X Accounting RADIUS server group in the Authentication Dot1x Method
List Table.
12.5.9 Default Settings
Feature Default Settings
Global AAA function Disabled.
Enable password No password is defined.
RADIUS server

Auth port is 1812.
 Acct port is 1813.
 Retransmit is 2 times.

Timeout is 5 seconds.
TACACA+ server

Communication port is 1812.

Timeout is 5 seconds.
Server group Two server groups are preset: radius and tacacs.
All RADIUS servers are added in the server group radius.
All TACACS+ servers are added in the Server group tacacs.
Authentication login method
list
The list contains local, and the defau
lt login username and
passwords are both admin.