TP-Link T2500G-10TS - SNMP View

227
The following entries are displayed on this screen:

Global Config
SNMP:
Enable/Disable the SNMP function.

Local Engine
Local Engine ID:
Specify the switch’s
Engine ID for the remote clients. The
Engine ID is a unique alphanumeric string used to identify the
SNMP engine on the switch.

Remote Engine
Remote Engine ID:
Specify the Remote Engine ID for switch
. The Engine ID is a
unique alphanumeric st
ring used to identify the SNMP engine
on the remote device which receives informs from switch.
Note:
The amount of Engine ID characters must be even.
13.1.2 SNMP View
The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the
switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is
created for the SNMP management station to manage MIB objects.
Choose the menu SNMP→SNMP Config→SNMP View to load the following page.
Figure 13-4 SNMP View
The following entries are displayed on this screen: