TP-Link T2500G-10TS - 4.2 User Management

25

Global address Table
Select:
Select the desired entry to delete or modify the corresponding
global address.
Global Address:
Modify the global address.
Prefix Length:
Modify the prefix length of the global address.
Type: Displays the configuration mode of the global address.
 Manual:
Indicates that the corresponding address is
configured manually
 Auto:
Indicates that the corresponding address is created
automatically using
the RA message or obtained from the
DHCPv6 Server.
Preferred Lifetime
/Valid Lifetime:
Displays the preferred time and valid time of the global address.
Status: Displays the status of the global address.
 Normal: Indicates that the global address is normal.
 Try:
Indicates that the global address may be newly
configured.
 Repeat:
Indicates that the corresponding address is
duplicate. It is illegal to access the switch using this address.
Tips:
After adding a global IPv6 address to your switch manually here, you can configure your PC’s
global IPv6 address in the same subnet with the switch and login to the switch via its global
IPv6 address.
4.2 User Management
User Management functions to configure the user name and password for users to log on to
the Web management page with a certain access level so as to protect the settings of the
switch from being randomly changed.
The User Management function can be implemented on User Table and User Config pages.
4.2.1 User Table
On this page you can view the information about the current users of the switch.
Choose the menu System→User Management→User Table to load the following page.
Figure 4-11 User Table